| |
|
| |
|
| |
 |
- Oil reservoir
- Hyraulic steering oil pump
- Bracket to engine body.
- Assemble valf & piston
- 5/8 R6 hose from reservior to
oil pump Fasten hose clamps.
- Return hose from lift to reservior
3/8 R6
- Pressure hose 5/16 R1 from oil
pump to lift
- Assemble tie rod
- After that center the valve shaft
and fasten with M8 bolts
- Use special sea 10 or 20 oil (
1 lt. )start engine, check oil level and add some more if necesary check
fastining boltsand hoses after a week.
- The adjusting screw of the pressure valve
Top ^
|
| |
|
| |
 |
- Oil reservoir
- Hyraulic steering oil pump
- Bracket to engine body.
- Lift valve & pistons
should be assembled and gap of 4 cms.left between exhaust pipe.
- 5/8 R6 hose from reservior
to oil pump Fasten hose clamps.
- Return hose from lift to
reservior 3/8 R6
- Pressure hose 5/16 R1 from
oil pump to lift
- Assemble tie rod
- After that center the valve
shaft and fasten with M8 bolts
- Use special sea 10 or 20
oil ( 1 lt. )start engine, check oil level and add some more if
necesary check fastining boltsand hoses after a week.
- The adjusting screw of the pressure valve
Top ^
|
|
| |
|
 |
- Oil reservoir
- Hyraulic steering oil pump
- Bracket to engine body.
- Lift valve & pistons
should be assembled and gap of 4 cms.left between exhaust pipe.
- 5/8 R6 hose from reservior
to oil pump Fasten hose clamps.
- Return hose from lift to
reservior 3/8 R6
- Pressure hose 5/16 R1 from
oil pump to lift
- Assemble tie rod
- After that center the valve
shaft and fasten with M8 bolts
- Use special sea 10 or 20
oil ( 1 lt. )start engine, check oil level and add some more if
necesary check fastining boltsand hoses after a week.
- The adjusting screw of the pressure valve
Top ^
|
|
| |
|
|
| |
Back
|
|
